| 
Installation of Capture-to-Go
Driver
WDM-based for Windows 98/98-SE
- Run the PC Card (PCMCIA) Property from the Control Panel to
detect new card.
- Insert the Capture-to-Go, TV-to-Go, or Video Conferencing-to-Go
card into a Zoomed Video (ZV) ENABLED slot.
- Follow the on-screen instructions and point to the drive letter
or folder of the installation files
- Confirm that the PC card is properly installed by running
the System Properties from the Control Panel. The card should
be recognized as "Margi, WDM Video Capture" under "Sound,
video and game controllers" from the Device Manager.
- Insert the Total Capture driver CD-ROM disc into the drive,
run the SETUP.EXE.
- Follow the on-screen instructions to complete the installation.
Windows 98 and 95B (OSR2)
Card and Socket Services Provider (supports
Plug-and-Play):
- Run PC Card (PCMCIA) Property from
the Control Panel to detect new card
(see Figure 1).
Figure 1 - PC Card displays both empty slots.
- Simply insert the MPEG-to-Go card
into the ZV-Enabled slot. (see Figure 2)
Figure 2 - New Hardware Found with OSR2 - PC
Card
IMPORTANT: Windows 95 will prompt for the location
of the file •MargiPNP.vxdê since it could not be found. At this
point, simply type D:\ (where D: is your
CD-ROM drive), and click OK. The drivers will then be automatically
installed.
- After the installation is complete, there
will be 2 loud beeps once the card is recognized (see Figure
3)
Figure 3 - PC Card displays configured card
|
