|
Windows 98 and 95B (OSR2)
Card and Socket Services Provider (supports
Plug-and-Play):
- Run PC Card (PCMCIA) Property from
the Control Panel to detect new card
(see Figure 1).
Figure 1 - PC Card displays both empty slots.
- Simply insert the MPEG-to-Go card
into the ZV-Enabled slot. (see Figure 2)
Figure 2 - New Hardware Found with OSR2 - PC
Card
IMPORTANT: Windows 95 will prompt for the location
of the file •MargiPNP.vxdê since it could not be found. At this
point, simply type D:\ (where D: is your
CD-ROM drive), and click OK. The drivers will then be automatically
installed.
- After the installation is complete, there
will be 2 loud beeps once the card is recognized (see Figure
3)
Figure 3 - PC Card displays configured card
|
